Kayan aiki Karfe
Ana amfani da ƙarfe na kayan aiki don kera mutuƙar ɗanɗano mai sanyi, mutuƙar ƙirƙira mai zafi, mutun simintin gyare-gyare da sauran nau'ikan ƙarfe.Mould shine babban kayan aikin masana'anta a cikin sassan masana'antu kamar masana'antar injin, kayan aikin rediyo, injina da kayan lantarki. na mutun kai tsaye yana rinjayar ingancin fasahar sarrafa matsa lamba, daidaitaccen fitowar samfur da farashin samarwa, da inganci da rayuwar rayuwar mutun baya ga tsarin tsari mai ma'ana da daidaiton sarrafawa, galibi abin da mutun ya shafa da zafi magani.
Tool karfe za a iya wajen zuwa kashi: sanyi birgima mutu karfe, zafi birgima mutu karfe da filastik mutu karfe iri uku, amfani da ƙirƙira, stamping, yankan, mutu simintin gyaran kafa da sauransu.Sakamakon iri-iri na mold AMFANI daban-daban, aiki yanayi yana da wuyar gaske, don haka ga mold karfe, bisa ga yanayin aiki na mold, ya kamata a sami babban ƙarfi, ƙarfi, juriya mai ƙarfi, isasshen ƙarfi, da ƙarfin ƙarfi, hardening da sauran aikin aiwatarwa.Saboda irin wannan amfani shine. daban-daban, yanayin aiki yana da rikitarwa, don haka ya mutu buƙatar aikin aikin ƙarfe kuma ya bambanta.
| Abu | Mold karfe mashaya/Die karfe mashaya/Mold Karfe Bar: Die karfe irin karfe ne da ake amfani da shi don yin sanyi ya mutu, zafi mai zafi ya mutu, mutuwa-simintin ya mutu da sauran ya mutu.Molds sune manyan kayan aikin sarrafa sassa na masana'antu kamar masana'antar kera, kayan aikin rediyo, injina, na'urorin lantarki, da sauransu. |
| Kayan abu | 3Cr2Mo/1.2311/1.2312/P20/1.2738/718H/P20+Ni/1.2316/1.2083/4Cr13 |
| /sus420j2/420/S136/NAK80H13/1.2344/SKD61/5CrNiMo/SKT4/1.2714 | |
| Cr12/D3/1.2080/Cr12MoV/D2/1.2379/SKD11/9CrWMn/O1/1.2510/SKS3/DC53 | |
| 40Cr/5140/35CrMo/42CrMo/4140/1.7225 | |
| C45/C50/1045/1050/S50C/S45C/T10/T8 | |
| M2/1.338/SKH51 | |
| Diamita | 12mm-650mm |
| Surface | mai tsabta / baƙar fata mai laushi / niƙa / niƙa zane da sauransu. |
| Shiryawa | Takarda mai hana ruwa, da tsiri na karfe.Daidaitaccen Kunshin Kayan Wuta na Fitarwa.Dace da kowane nau'in sufuri, ko kuma yadda ake buƙata |
| MOQ | 1 ton |
| Lokacin jigilar kaya | A cikin kwanaki 7-10 na aiki bayan karɓar biya |
| Aikace-aikace | masana'antar sinadarai, masana'antar jigilar kayayyaki, masana'antar masana'antu, |
| yi, ado Industry, wutar lantarki, famfo shafts, | |
| sanitary wars , furniture iyawa, tukunyar jirgi, high zafin jiki | |
| resistant, low zafin jiki resistant, lalata resistant. | |
| Biya | 30% (T/T Deposit) |
| Hakuri | ± 3% |
| Nau'in | Ya da Alloy |
| Wurin Asalin | Shandong |
| Sunan Alama | Kunda |
